Mountain Bike Reviews Forum banner

Hayes MX2

855 views 2 replies 2 participants last post by  PL355T 
#1 ·
Under the front caliper of my my Hayes MX2 brake, there is a small screw. does anyone have any idea what it is for? I have searched the net and can find no information on it.
 
#2 ·
The small....

allen head screw on the Hayes MX rotor body is to lock the inboard pad adjuster, i.e. the larger 5mm bolt on the back of the rotor. You loosen the small screw, adjust the inboard pad with a 5mm allen wrench then tighten the small screw down to lock it in place. Don't forget to loosen the small screw before adjusting the inboard pad or you'll ruin it. And don't forget to tighten it back up when your finished or the inboard pad will back out after a ride or two.

Good Dirt
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top