Results 1 to 3 of 3
  1. #1

    Anyone running a 7" or 8" with MX pro Marzocchi

    Is anyone running a larger rotor than 6" on a MX pro. I have an 04 and am looking for more braking power from my Hayes Mags. I ride mostly aggressive XC and just want to never have to use more than one finger to get the power I want. I know Mar says they don't recommend it since they only have 30mm lowers but my thought is either way I am putting the same force into the wheel with either setup, I am just putting two fingers on with the 6 to clamp down. I read about fork flex and possible accelerated bushing wear but don't buy totally into it. Does anyone have experience with this combo and have they had any problems?

  2. #2
    Sofa King We Todd Did
    Reputation: SpinWheelz's Avatar
    Join Date
    May 2004
    2003 Marzocchi MX Pro with Avid BB7 185mm brakes on an On*One Inbred. Works great.

  3. #3
    Nightriding rules SuperModerator
    Reputation: crisillo's Avatar
    Join Date
    Jul 2004
    I have used an 185mm rotor on a 04 MX Comp ETA and currently on an 04 Marathon SL (same chassis as the MX) without issues. I can see it flex a bit when I brake, but I also weigh about 215lbs

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts



VISIT US AT and the ConsumerReview Network are business units of Invenda Corporation

(C) Copyright 1996-2018. All Rights Reserved.