after ride...pads rubbing?
so after today's ride, I put my bike back in it's spot, I heard the rear disc squeal as I rooled the bike. I picked it up by the seat and spun the rear wheel. It was rubbing the pad.
Disc is straight, and it didn't rub before today's journey.
I had to back the pads off several clicks to stop the rub. what gives? What should I look for? All bolts are tight, and disc is straight.
2012 Trek Marlin BB7's / SD-7's, G3's, and Kenda Nevegals
My website: www.n2ovette.com
just spitballing but is the rear wheel QR tight and where it usually is? if the wheel is loose or got jostled by a big bump etc the wheel and thus the rotor may be just slightly out of wack.
Originally Posted by Limey Johnson
Hope this helps and hope u figure it out.
I had a similar issue today before my ride. I had removed the rear wheel last night for maintenance and
this was the issue. Messed around with the QR and viola problem solved. After todays ride I had the same issue the inner (wheel side) pad was rubbing and no matter what I did, adjust the cables and QR it still rubbed. This is my first bike with disc brakes and I'm finding them to be a hassle!
Originally Posted by jjc155
SS ==> Nut up or Shut up!
By tahoegold in forum Brake Time
Last Post: 06-24-2010, 01:11 PM
By fuzzyBuzz in forum Brake Time
Last Post: 09-29-2009, 11:37 AM
By sangmatt in forum Brake Time
Last Post: 08-04-2007, 01:02 PM
By copperhead13 in forum Brake Time
Last Post: 11-22-2006, 12:45 PM
By medic1454 in forum Brake Time
Last Post: 03-08-2005, 09:33 PM