Results 1 to 4 of 4
  1. #1
    Pinhead
    Reputation:
    Join Date
    May 2006
    Posts
    12

    Klein Adept Pro brake cable routing

    I just picked up a Klein Adept Pro frame, and need some advice on rear brake cable routing. My Attitude has internal routing for the rear brake, but the Adept doesn't. I see braze-ons for disc brake lines on the top tube, and assume I'd use these, but the cable housing for my v-brakes is too small to fit snugly inside these. Are there clips I should be looking for to hold my housing in place?

    Anyone with a photo of their bike's setup, could you post these? As it stands, I'll take the written word response as well. Klein's website has nothing, and their manual for the bike doesn't show what to do about it.

    Thanks for any help!

  2. #2
    6x7=Dont Panic!
    Reputation: TheRedMantra's Avatar
    Join Date
    Jan 2004
    Posts
    2,009
    Why not just run full length housing and use zip-ties?
    Herro prease

  3. #3
    6x7=Dont Panic!
    Reputation: TheRedMantra's Avatar
    Join Date
    Jan 2004
    Posts
    2,009
    And If I'm not understanding exactly what the problem is maybe one of these would be better?
    http://www.universalcycles.com/shopp...&category=1606
    http://www.universalcycles.com/shopp...&category=1606
    Herro prease

  4. #4
    Pinhead
    Reputation:
    Join Date
    May 2006
    Posts
    12
    Thanks for the reply. I already plan to run a full-length housing for the cable...it's the cable guide on the bike I have a question about. I have plenty of zip ties to hold the housing inside the guides (they have slots for this) I just wondered if there was anything more 'finished' looking.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •