Hello fellow bikers. I have a question for yall. I have a chance to buy a 2009 trek fuel 9.8 bike. I was thinkging I could take the parts off and build a a different frame to get started. The issue with the bike is that the frame is broken near the bottom tube and several chips on the headtube. The fork is very beat up but i think the stanchions are ok and the front wheel is totalled. So the guy is asking about $1000. I think this may be too much because the frame it gone so what should i offer. Its got xt nine speed all around. I know the old nine speed can be pretty cheap on craigslist. here are the specs. any help would be awesome.
Frame OCLV Red Carbon w/ABP Race, Full Floater, magnesium EVO Link, oversized bearings, 100mm travel
Front Suspension RockShox SID Race w/remote Pop Loc lever, dual air, Motion Control, rebound, alloy steerer, 100mm
Rear Shock Fox Float RP23, custom "race tuned" w/3-position Pro Pedal, rebound; 6.5x1.5"
Wheels Bontrager Race X Lite Disc wheel system, centerlock, tubeless ready
Tires Bontrager Jones XR w/Kevlar bead, 26x2.25/2.2"; 127 tpi
Shifters Shimano Deore XT
Front Derailleur Shimano Deore XT, high mount
Rear Derailleur Shimano Deore XT "Shadow"
Crank Shimano Deore XT 44/32/22
Cassette SRAM PG970 11-32, 9 speed
Saddle Bontrager Race Lite w/hollow stainless steel rails
Seat Post Bontrager XXX Lite mast system
Handlebars Bontrager Race X Lite, carbon, 0mm rise, 31.8mm, 620mm width
Stem Bontrager Race X Lite, 7 degree, 31.8mm
Headset Trek Mountain Integrated System w/sealed bearings
Brakeset Shimano Deore XT Ti hydraulic disc, custom Ti version; 180mm front rotor, 160mm rear rotor (Trek exclusive
Results 1 to 1 of 1
Check out the hottest mountain bike products from these brands!
See All Interbike Coverage - Click Here »