Hi All.. Has anyone tried the Sin relaxed geometry cleat on a Fury?
I have been thinking about trying this to slacken my head angle and lower my bottom bracket.
If anyone has tried this on the Fury or any other MC I would like to hear your input.
Thanks
Eric

We talked about this in my old "official thread". It does help geometry, but drops the travel to around 3".

A couple other ideas would be to get a 7"x1.75" rear shock, or to use some kind of spacer between the cleat and the swingarm (as I do). These would be "unauthorized" of course.;)

I didn't realize the cleat would drop the travel that much.
could you give more info on this unauthorized spacer :D

I didn't realize the cleat would drop the travel that much.
could you give more info on this unauthorized spacer :D
Something like washers placed between. My bike has a 5mm thick MC made prototype spacer.

Something like washers placed between. My bike has a 5mm thick MC made prototype spacer.
Thanks for the info..I'll give it a try.
Right now I have my Fury set up with a modifed coil/air 04 Marzocchi Z150 SL
and a Manitou swinger 3 way air shock.
I really like the ride but I would like to lower the rear end and rake out the head angle little bit.
How much of a geometry change did you notice with that mod?

Thanks for the info..I'll give it a try.
Right now I have my Fury set up with a modifed coil/air 04 Marzocchi Z150 SL
and a Manitou swinger 3 way air shock.
I really like the ride but I would like to lower the rear end and rake out the head angle little bit.
How much of a geometry change did you notice with that mod?

There's plenty of photos of my bikes already on here. I've got a 6" TALAS and still would like the head angle a little slacker. I'm pushing for a slacker HT angle on the next production run.