Results 1 to 9 of 9
  1. #1
    mtbr member
    Reputation:
    Join Date
    Aug 2009
    Posts
    45

    1999 Klein Attitude disc adapter

    I recently purchased a 1999 Klein Attitude. I want to put disc brakes on them. anyone have this bike and did you update them with disc brakes? I need some info as to what adapter was used and so forth. any inof/advice would be greatly appreciated.

  2. #2
    mtbr member
    Reputation: rsullivan's Avatar
    Join Date
    May 2009
    Posts
    560
    If I recall, the brake mount is inside the junction of the seatstay and the chainstay. There are two ways you can do this: 1- call Hayes and ask for the proper rear brake which would have to come from their warranty department for about 75.00 for only the caliper(no hose or lever) which is what I did for my brothers Klein. 2- Get a Brake Therapy unit which would utilize the brake stud on the non drive side. not as clean looking but would still work. Here is the link.... http://2btherapy.com/
    hope that helps
    The Official Mid-west Canfield Brothers #1 Fan and Demo fleet !!
    http://i3.photobucket.com/albums/y79...psb5c701c1.jpg

  3. #3
    mtbr member
    Reputation:
    Join Date
    Aug 2009
    Posts
    45
    would this work??

    the adapter looks like it would fit. my bike has the same hole set up. the blue bike is a Klein.

    http://www.torontocycles.com/Selling/Adapters.html

  4. #4
    mtbr member
    Reputation: rsullivan's Avatar
    Join Date
    May 2009
    Posts
    560
    wish I had seen those earlier... would have saved a few bucks.. since I already had the rear brake and hade to buy another one...LOL
    The Official Mid-west Canfield Brothers #1 Fan and Demo fleet !!
    http://i3.photobucket.com/albums/y79...psb5c701c1.jpg

  5. #5
    mtbr member
    Reputation:
    Join Date
    Aug 2009
    Posts
    45
    Quote Originally Posted by rsullivan
    wish I had seen those earlier... would have saved a few bucks.. since I already had the rear brake and hade to buy another one...LOL
    so you would recommend??

  6. #6
    mtbr member
    Reputation: rsullivan's Avatar
    Join Date
    May 2009
    Posts
    560
    Don't see why it wouldn't work.... that is kinda what I had in mind when I was looking for a adapter when working on my bros bike a while back. it is not a big cost so it would definately be worth a try.... (27.00 shipped). I say go for it
    The Official Mid-west Canfield Brothers #1 Fan and Demo fleet !!
    http://i3.photobucket.com/albums/y79...psb5c701c1.jpg

  7. #7
    mtbr member
    Reputation:
    Join Date
    Aug 2004
    Posts
    114
    If that doesn't work take a look at these as well, specifically the DM-UNI.

    http://www.a2zcomponents.com/02produ...dapter_05.html

  8. #8
    mtbr member
    Reputation: rsullivan's Avatar
    Join Date
    May 2009
    Posts
    560

    That more than...

    Quote Originally Posted by frints
    If that doesn't work take a look at these as well, specifically the DM-UNI.

    http://www.a2zcomponents.com/02produ...dapter_05.html
    likely won't work with a Klein due to the type of dropout it has.... but who knows...
    The Official Mid-west Canfield Brothers #1 Fan and Demo fleet !!
    http://i3.photobucket.com/albums/y79...psb5c701c1.jpg

  9. #9
    mtbr member
    Reputation:
    Join Date
    Aug 2009
    Posts
    45
    Quote Originally Posted by rsullivan
    Don't see why it wouldn't work.... that is kinda what I had in mind when I was looking for a adapter when working on my bros bike a while back. it is not a big cost so it would definately be worth a try.... (27.00 shipped). I say go for it
    thx. will do just that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •