Results 1 to 3 of 3
  1. #1
    mtbr member
    Reputation:
    Join Date
    May 2007
    Posts
    814

    SRAM X5/X7 2x10 FD, Dual Pull

    Can any one confirm or deny if the X5 FD from the Seeker or the X7 FD from the Goblin are dual pull compatible? Reading the SRAM website it would appear that they are but I've never set up an FD before and am hoping to use one of the FD's I've got (thanks again, by the way!) on an older bike that is top pull.
    Eric

  2. #2
    mtbr member
    Reputation: BigDaddyFlyer's Avatar
    Join Date
    Apr 2010
    Posts
    1,765
    I know the X5 on the Seeker is and depending on when the Goblin was made it will be also.

    You can tell its dual pull by just looking at the back of the FD that faces the rear tire. If its obvious the cable can be run from the top or bottom then its dual pull.

    Hope that helps!

    Jeremy
    Homebrewer, Patriot, Amateur Photographer

  3. #3
    mtbr member
    Reputation:
    Join Date
    May 2007
    Posts
    814
    Perfect! very helpful, thanks Jeremy.
    Eric

Similar Threads

  1. Dual pull derailleurs
    By fernandoj in forum Vintage, Retro, Classic
    Replies: 1
    Last Post: 05-15-2013, 06:35 AM
  2. Cable guide position for top pull (dual pull) XT from mech
    By shandcycles in forum Frame Building
    Replies: 5
    Last Post: 06-23-2012, 05:53 PM
  3. FD - how can I know if it is dual pull or top pull?
    By xenon in forum Drivetrain - shifters, derailleurs, cranks
    Replies: 4
    Last Post: 05-12-2012, 01:49 AM
  4. SRAM X7 Front derailleur - dual or top pull
    By bank5 in forum Drivetrain - shifters, derailleurs, cranks
    Replies: 2
    Last Post: 04-20-2012, 06:40 AM
  5. XT 2x10 Crankset Compatible with SRAM 2x10 Drive Terrain??
    By sbchisholm in forum Drivetrain - shifters, derailleurs, cranks
    Replies: 2
    Last Post: 12-01-2011, 07:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •