Results 1 to 6 of 6

Thread: Token Hubs

  1. #1
    mtbr member
    Reputation: Johnny Sin's Avatar
    Join Date
    May 2010
    Posts
    17

    Token Hubs

    I have a set of XC Token hubs, model number TK4915. The bearings have developed a bit of play in them, so I want to change them out. Only problems is I can’t get the freewheel body off. I have emailed Token and they sent me an instruction manual, but it’s next to useless, it just says “remove freewheel body”. I've tried pulling it, twisting while pulling, but I’m out of ideas.

    Does anyone have any experience with Token hubs? Or have any suggestions on how to remove the freewheel body…

    Thanks

  2. #2
    mtbr member
    Reputation:
    Join Date
    Jul 2004
    Posts
    907
    I'be taken apart a few. After removing the axle the freehub just pulled off. It took a pretty good tug.
    OB1 Kielbasa

    One is good!

  3. #3
    mtbr member
    Reputation: Johnny Sin's Avatar
    Join Date
    May 2010
    Posts
    17
    Do you have to remove the axle as well? I've removed the QR adapters, but didn't think I'd have to remove too much more than that. Thought I was pulling pretty hard, maybe I'll just pull harder.

  4. #4
    mtbr member
    Reputation:
    Join Date
    Jul 2004
    Posts
    907
    Yes the axle must be removed.
    OB1 Kielbasa

    One is good!

  5. #5
    mtbr member
    Reputation:
    Join Date
    Jan 2004
    Posts
    170
    It depends if they are 29er specific hubs though, surely..?

  6. #6
    mtbr member
    Reputation: Johnny Sin's Avatar
    Join Date
    May 2010
    Posts
    17
    Got it off, turns out I just wasn't pulling it hard enough.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •