well I have a set of wheels with dtswiss 240 hubs and stans arch rims but the rear hub is for a geared bike and im putting these on my redline monocog which is a single speed. all the kits online that i have found are brand specific i.e. will only work with shimano hubs or origin 8 hubs, so im asking if anyone knows of a universal high quality kit or a kit specific for dt swiss hubs?
any kit that is shimano compatible will work on your DT hub. All it is is a spacer set, a cog (shimano splined), a lock ring, and usually a tensioner.
i'd recommend that you get a cog with a wider base than the typical cheapo steel ones that come with kits... they won't gouge your freehub body. chris king & niner are two examples.
Originally Posted by pvd
Time to stop believing the hype and start doing some science.
I'm currently using a Surly cog and generic ebay spacer kit on my DT240 rear hub. Works just fine. No need to get fancy with the spacers unless you want to. I would however opt for the wide based cog. ISAR's cogs are nice and have a nice wide base.