Has any one used the Cane Creek EC44/40 heaset to fit a tapered fork into a straight 1 1/8 designed headtube? If so, how does it work?
This may be the answer to fit the 650b tappered forks to old style 1 1/8 designed bikes.
What's the ID (inner diameter) of your headtube? If it's 44mm, then you will be able to use tapered fork with EC44 headset.
If it's a classic MTB 34mm ID headtube, then EC44 won't fit.
And also, sterere won't fit.
PS: What's the frame? Take a picture and post here, this might help
nothing relevant to say
Sadly, your thinking is a bit skewed. The 44 designates the headtube ID. The 40 designates the crownrace of the fork. This lower headset cup is for a tapered fork and 44mm (ID) headtube.
A traditional 1.125 headtube has an ID at 33.95mm which equals EC34, per the S.H.I.S .
A Zero-Stack or Semi integrated headtube for 1.125 has an ID 43.95, and COULD accept the EC44 lowercup. if the headtube has a cup-depth ability of at least 12.5mm, where 15 is safer.
Cane Creek has some great Tech Manuals located HERE
It is a 2011 Specialized Camber with ZS 44 mm headset, so it seems the EC44 would work. I just read in this link
I need your opinions on my fork
that: "Nominal insertion bore depth for 44mm head-tubes is 9mm. EC44/40 requires an insertion depth of 15mm. Park Tool Reamer 788 should be used with the supplied spacer to reach the 15mm bore depth for EC44/40 Bottoms. " so I need to check if this reaming would be needed as well.
By op12389 in forum Bike and Frame discussion
Last Post: 08-01-2013, 05:20 PM
Last Post: 11-19-2012, 04:58 PM
By maynard in forum Scott Sports
Last Post: 04-05-2012, 10:53 AM
By TRAIL CRANKER in forum Shocks and Suspension
Last Post: 02-09-2012, 06:41 PM
By DFYFZX in forum Shocks and Suspension
Last Post: 12-18-2011, 09:45 PM